多家媒体报道[查看更多]
查看工程现场[查看更多]
权威代理[查看更多]
联系千点热[查看更多]
010-8242 5078
134 6667 4681
TF834.3/836.3 - Oil Burner Safety Control For 1- or 2-stage oil power burners up to 30kg/h capacity with or without oil preheater and intermittent operations. Flame detection: - Photoresistor MZ 770 S - Infrared-flicker detector IRD 1010 - UV solid state sensor UVD 970 A special contact in the control unit short-circuits the thermo-switch of the oil preheater as soon as the burner is operating and the flame signal is present. Therefore interruption of the burner due to decreasing oil temperature (e.g. in case of high oil flow) can be prevented. If the control box goes into lock-out mode, the oil preheater power supply is also disconnected.
TF834.2 | 1-stage operation |
post-ignition time ca. 20 sec. | |
low voltage protection according to EN230 | |
TF834 E.3 | 1-stage operation |
no post-ignition | |
low voltage protection according to EN230 | |
TF836.3 | 2-stage operation |
post-ignition time 2-4 sec. | |
low voltage protection according to EN230 |
暂无
暂无